Refer to pages 75, 77 and 79 for further information about the settings relating to the alarm, the alarm image and the alarm output terminal.
The alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is necessary to con- figure the settings in advance. Select the image quality from the following. For example, an operator can remotely control lights in a place where the camera is installed by connect- ing the terminal to the light controller. Refer to the operat- ing instructions of the connected devices for further [Detection sensitivity] information about the functions and settings.
The status bar will be indicated in the "Detection area" Step 1 section to show the motion detection status of the cur- Set the video motion detection area by dragging the rently displayed area.
It is necessary to configure the settings of the mail server to perform the mail notification. The "Advanced func. Page Face Detection [Destination path name] [Password] Configure the settings for the destination directory to Enter a password. Available number of characters: 0 - 32 characters be used for the XML notification of the face detection. Default: None blank [User name] Enter a user name. Available number of characters: 0 - 32 characters Default: None blank Configuration of the settings relating to the face detection The "User mng.
Configure the settings relating to the user authentication [User auth. Configure the settings relating to the mail server [Mail] Click the [Mail] tab on the "Server" Configure the network settings [Network] Click the [Network] tab on the "Network" Refer to the network Do not enter an address already in use.
When the number is changed, it is necessary to change the port numbers registered [Max RTP packet size] in the PC and recorders, etc. Select "Unlimited byte " It is possible to enhance the network security by encrypting the access to cameras using the HTTPS When the [Confirm] button is clicked, the registered function.
This function is to be set in a router. Do not operate the web browser until the generation of CRT key is complete. While the CRT key is being generated, the refresh interval and line speed may be lower. In this case, the security alert window will be displayed each time the camera is locally accessed, even if the security certificate is installed.
For the installation, the server certificate issued by CA is required. Click the [Browse Press the [Enter] key on the keyboard. Step 2 When the security alert window is displayed, install the security certificate. Step 10 Step 7 Click "Yes". Step 2 Click "View Certificate". In this case, check the sys- tem status. Step 3 Click "Install Certificate Step 5 Click "Finish". Page Step 6 When the security alert window is displayed, click "Yes". Step 7 Click "OK". When performing the initial settings, the temporary URL will be displayed by clicking the [Set] button.
It is possible to check the status of the camera by connecting to the SNMP manager. When using the SNMP function, contact the network administrator. Page [Transmission interval] Select the interval for the FTP periodic image transmis- sion from the following.
Refer to page for further information about the settings relating to the FTP periodic image transmission. Step 2 Click the [Set] button after completing the settings. Page Configure The Settings Relating To The Schedules [Schedule] Configure the settings relating to the schedules [Schedule] On the "Schedule" page, it is possible to configure the settings relating to schedules as follows.
The "Schedule" page has only the [Schedule] tab. Up to 5 schedules can be set. Page Maintenance Of The Camera [Maintenance] Maintenance of the camera [Maintenance] System log check, firmware upgrade, status check and initialization of the setup menu can be performed on this page. The "Maintenance" page has 4 tabs; the [System log] tab, the [Upgrade] tab, [Status] tab and the [Default reset] tab.
Contact the dealer for further information about the firmware upgrade. Step 3 Click the radio button respective to the desired option to determine whether or not to initialize the settings after completing the firmware upgrade. The name of the firmware to be used for the upgrade should be "model name Use small letters.
Page Viewing Help Viewing Help If you want to know anything about operation or setup methods on screen, display the "Help" screen. Click the [Help] button. Check if the mail settings are configured correctly. Failed to find the POP3 server. Check if the IP address of the server is config- ured correctly.
Check if the DNS settings are config- ured correctly. Ask the network administrator. Information Bar. Depending on the OS installed on the PC, the following may occur.
Follow the instructions below when the. By performing the following solutions, other applications may not be affected. When using Internet Explorer 6. Networks Co. Click here. Operating Instructions Need help? Post your question in this forum. Report abuse Libble takes abuse of its services very seriously. Product: Spam. The following are descriptions of how to install the camera. The camera can be installed on a ceiling. The camera can also be installed upside down on the bracket or can be placed upside down on a desktop.
Page 18 Center of the Step 8 camera mount bracket Connect the cables to the network connector and the power inlet. It is unnecessary to make a hole in the ceiling as described in step O P E 2 of the "Wire through a hole in the ceiling" Page 21 Place the camera upside-down on a desktop without fixing Use it as a simple desktop device at meetings and on other occasions.
Place the camera on a level place not subject to vibrations. Ensure that the camera does not fall. When using the camera upside-down, select "On desktop " Page Detach The Camera Detach the camera The camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instructions below.
The following is an example of installation on the ceiling. It may damage the camera. Page Configure The Network Settings When using multiple cameras, it is necessary to configure the network settings of each camera independently. If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually on the "Network" page of the setup menu.
Complete each network setup item and click the [Save] button. Page Troubleshooting Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below.
0コメント