Extend serial cable

Brand New. Usb specification 1. KSh Jeffrytech Kenya. Nairobi, Nairobi Central, Region. Similar adverts. Features: USB specification 1. Features: usb specification 1. Condition: Brand New. Condition: New. USB 2. Usb 2. Introduction: this usb serial adapter is designed to make serial port expansion quick and simple.

Connecting to a usb port on your computer or usb hub, this usb serial adapter instantly adds an rs serial communication port to your system with easy plug-and-play and hot -plug features. Plugging the usb. All rights reserved. This image may not be used by other entities without the express written consent of wikiHow, Inc.

Pull your cable cord out. Grab a measuring tape and calculate how far you want to extend your cable cord by measuring from the end of the cord to the location where you want to plug it in. Write this measurement down to determine how long of an extension cable you need. Add 1—2 feet 0. Look in the middle of this metal piece to see if it has a thin piece of metal sticking out or a hole in the middle.

If it has a piece of metal sticking out, it is a plug. If it has a hole in the middle, it is a jack. Jot down the type of connection and take a photo with your phone. Plug and jack connections are commonly referred to as male and female connections. Check to see if there is a thin piece of metal sticking out, or a small opening for a plug. Take a picture and jot down the connection type to determine what kind of cord and coupler you need. Measure the diameter of the cable cord to figure out its type.

Coaxial cables come in a variety of frequencies, and your extension cord must be the same type as your current cord. To determine the type, measure the diameter of the cord. If it is 0. Occasionally you will see an older cable that is a little longer, but the vast majority of cords are essentially the same. Purchase a coaxial coupler that matches the end of your preexisting cord. Go to your local electronics store and ask to see coaxial couplers for cable cords.

The coupler is basically a small metal adapter that connects 2 coaxial cords. The other side must match the connection at the end of your preexisting wire. If you have a jack at the end of the cord, get a plug-to-jack coupler. Coaxial couplers are also known as F-type adapters. These kits are designed for installing an adapter on a new cord.

Pick up an extension cord that matches the coupler and port. Make sure that your cord has a plug on one end to connect it to the coupler.

The other end of the cord must have a connection that matches the port in your cable box, modem, or server. If your port has a plug in it, get an extension cord with a jack on one end and a plug in the other.

If your port has a jack in it, get an extension cord with 2 plugs. This cord must be the same type as the cord already in your wall. In most cases, this is going to be an RG-6 cord. Part 2. Install the coaxial coupler by hand.

You do not typically need tools for this. Attach your extension cable to the coaxial coupler. Take the plug end of your extension cable and screw it into the coupler by twisting it clockwise. If you have a coupler with flat sides around the rim of the connection, use a wrench to twist it into place.

Plug in your extended cable and test the connection. Insert the cord into the port and turn it clockwise to secure it. Once your cable is extended, turn your TV, modem, or server on and test the connection. Include your email address to get a message when this question is answered.